How to install Double Roller Blinds

How to install Double Roller Blinds

Before You Start

You will need the following:

1 x control bracket
1 x idle bracket
Screws
Child safety device

STEP 1

Identify which blind is to be installed on each window and the control side for that blind.

Install control bracket and spring bracket on window frame. For an inside mount install inside the reveal.

Face Fit / Outside Mount
Reveal Fit / Inside Mount

STEP 2

Starting with the blind in the top position, Insert the idle end of the blind into the idle bracket and then line up the control end with the control end bracket and push to insert. The idle end will extend to bridge the gap.
Repeat for the second blind in the bottom position.
(The top blind will be Reverse rolled and the Back blind will be a Standard Roll)

Important note: The chain needs to hang evenly front and back.

STEP 3

Slip the child safety cleat over the chain and let hang naturally. Screw into architrave or window reveal with minimal tension.

Tension Device with chain fitted

Please be aware that horizontal lines may appear on the roller blind fabric due to packaging. These lines will drop out once the blind has been hanging for a few days.

DOWNLOAD PDF INSTRUCTIONS