How to Install a Single Roller Blind

How to Install a Single Roller Blind

Before You Start

You will need the following:

2 x Bracket Cover (Outside Mount)
1 x Control Bracket
1 x Idle Spring Bracket
Child Safety Device


Identify which blind is to be installed on each window and the control side for that blind.

Install the control bracket and the idle bracket on the window frame.

For a recess mount install inside the reveal.


Insert the idle end of the blind into the idle bracket and then line up the control end with the control end bracket and push to insert. The idle end will extend to bridge the gap.

If you are outside mounting, slide the bracket covers on now.

Important note: The chain needs to hang evenly front and back.


Slip the child safety cleat over the chain and let hang naturally. Screw into architrave or window reveal with minimal tension.

Tension Device with chain fitted

Please be aware that horizontal lines may appear on the roller blind fabric due to packaging. These lines will drop out once the blind has been hanging for a few days.